Semi Automatic Power Cord Cable Wire Sticker Flag Labeller Machine
  • Model: VK-T807
  • Labeling precision: ±1mm (exclude the product label deviation)
  • Labeling speed: 20~40pcs/minite (its up to product size)
  • Applicable product size: 20≤length≤300mm, 20≤width≤200mm
  • Applicable label size: 20≤length≤150mm, 20≤width≤150mm
  • Machine size: 970*790*1440mm
  • Air pressure: 0.6Mpa
  • Power: 220V, 50/60HZ/140W
  • Weight: 99KG
View Video

Manual round surface wire labeling machine achieve semi-automatic labeling the adhesive label or adhesive film on the wire water pipe, screwdriver etc.

How the machine works:

Labeling machine is based on PLC as the core, receiving signals and controlling the work of all systems. When stepping the pedal switch, the signal will be sent to the PLC and processed according to a set of programs.

Then complete the processes of stripping label and feeding label by starting on the stepper motor control system. At the same time, the label position sensor (also known as electric eye) will always pay attention to the distance by the label going through.

When a label goes through, the sensor will send the signal to PLC immediately. Then the PLC, according to a set of programs, sends the signal to stepper motor control system to stop and starts on the labeling system so as to complete the process of labeling.

Working principle

Control-system-of-the-cabel-labeling-machine.png

Transmission system:

The stepper motor provides power to strip labels through the synchronous belt driving the traction mechanism and the material receiving mechanism, so as to achieve stripping labels and recycling the Glassine backing sheet.

Control system:

This machine is controlled by using electric and gas. The signal from electric eye (SICK sensor) and pedal switch will be transferred to PLC for processing, in order to achieve all processes of stripping labels, labeling and counting.

Application of wire labeling machine:

Product Applicable: The long round products which must be labeled with paper label or film label on the surface;

Industries applicable: Widely used in Electric, Medicine, Plastic, industries etc.

Technic characteristics of wire labeling machine:

labeling wire electric.jpg

Small structure takes up less space and easy to move and load.

Good labeling precision and stability; Neat, no wrinkle, no bubble.

It is easy to use and adjust. The new workers can use or adjust it easily after simple training.

Stable operation.

Technic data:

labeling wire electric.jpg

controlling sign inside screen for operate machinery labelin

labels board electric.jpg

ModelVK-T807
Labeling precision±1mm (exclude the product label deviation)
Labeling speed20~40pcs/minite (its up to product size)
Applicable product size20≤length≤300mm, 20≤width≤200mm
Applicable label size20≤length≤150mm, 20≤width≤150mm
Machine size970*790*1440mm
Air pressure0.6Mpa
Power220V, 50/60HZ/140W
Weight99

Configuration:

labeling wire applicator.jpg

SrItemBrandQtyUnitMark
1Step motorYankon1PC
2SolenoidSMC4PC
3Sensor(U-type fiber)Keyence4PC
4PLCPanasonic1PC
5Touch ScreenWenView1PC
6CylinderSMC4PC
7Vacuum generatorSMC2PC
8Power switchSMC1PC
9PhotoswitchKeyence3PC
10Machine cabinet with SS304, Structural components adopt oxidized aluminum, chrome plated rods and SS304

Other drawing

Labeling head

Labeling head.jpg

Labeling structure

labeling structure.jpg

Back view of labeling wire machine

Different view.jpg

Size drawing of wire labeling machine semi automatic:

Size drawing.jpg

Labeling samples:

wire labeling machine.jpg

cable for labeling machine.jpg

cable for labeling machine.jpg